S13/10KV three Phase Oil-immersed Transformer
The S13 series 10kv oil-immersed transformer designed and produced by our company adopts the structure of fully sealed corrugated oil tank, which is free of maintenance, convenient for maintenance and stable for operation, with remarkable economic benefits.Long service life, maintenance-free operation.The fully sealed transformer box cover and the box edge adopt bolt connection or welded structure to isolate the contact between oil and air, the insulation will not be affected by moisture, greatly reduce the aging rate of insulation, and improve the service life.Compact design structure, low running noise.Because of the use of new materials and new technology, noise reduction, no oil storage tank, the height is lower than similar products.No need to change oil in the normal life period, improve the safety and reliability in operation.
- 1. The core:
All adopt high quality grain oriented cold rolled silicon steel sheet, all inclined without hole binding structure, the iron core is multi-step ladder, three or five joints, low void loss, low noise;The coiling iron core is directly wound by special equipment, without joint and Angle weight, which reduces the magnetoresistance and reduces the air loss.
2. The coil:
It is made of flat copper coin or copper knot made of high quality non-oxygen copper rod, which has the form of circular simple type, continuous type, new spiral type, split type, etc. It has sufficient electrical strength, mechanical strength and heat dissipation ability.
3. The tank:
Is made of high qualified steel plate welding and become, such as elliptic shape, structure, heat dissipation component adopts chip radiator, expand the radiator or corrugated tank, fuel tank and reliable sealing experiment was carried out in the factory, both inside and outside surface after pickling, phosphating treatment, both inside and outside surface of three times primer, paint spraying again, product has, hot and humid, salt mist prevent mould, beautiful durable, enhance the operation reliability.Adopt corrugated board oil tank, the change of oil volume caused by temperature by the elastic adjustment of corrugated sheet so that the transformer oil and air isolation extended use orders.
4. Energy saving
Due to the special structure of the core and the annealing process of rolling high quality cold rolled silicon steel sheet with crystal orientation, the no-load loss, no-load current and noise of this series of transformers are reduced by 30%, 70% and 8 db respectively compared with the same capacity S9.
Note: Due to continuous product improvement, the dimensions provided in this sample are for reference only. If necessary, our company can design and produce according to user requirements. Please contact the company in time.
|Load loss (kW)||Short-circuit impedance|
Qingdao Hengfengyou Electrical Engineering Co., Ltd. (hereinafter referred to as Hengfengyou) is a large-scale enterprise group with electricity transmission and distribution as its main business,which integrates scientific research, development, manufacturing and trade. After 30 years rapid economy development in China, Hengfengyou now is a leading R & D, manufacturing and service base for MV
, HV and ultra-HV power distribution equipment in China. At present,we have 50 senior technicians and more than 300 employees, with a complete sales and service system. Our products sell well at home and abroad, and our annual output value adds up to $100 million. .
At present, Hengfengyou has 6 wholly-owned and holding subsidiaries, which are respectively engaged in R & D, manufacturing and service of transformers, switchgear, package/unit substation, pole-mounted high-voltage vacuum circuit breakers, new energy, and electrical engineering.
For a long time, the company has maintained close technical exchanges and cooperation with domestic and foreign universities, scientific research institutes and electric power enterprises.
Hengfengyou independently designed and developed SCB series dry-type transformer and SC series oil immersed transformer. Our product performs with high operation efficiency, and obvious energy conservation. The overall performance index reaches the world's advanced level.
The company also maintains long-term strategic partnership with Schneider, ABB, Simens, Chint and other electric suppliers. We absorbed foreign advanced experience in electrical equipment production and independently designed and developed a series of substation equipment, which realized the automation and intelligence of the substation, and of which the performance has been highly recognized by the user at home and abroad. In the following five years, the company plans to build an intelligent workshop with an annual output of 100000 transformers.Then,the intelligent robot will replace 80% of the existing labor force, which will greatly improve the production efficiency, lower production cost, and produce more energy-saving, environmentally friendly, more safe and reliable the product for the users!
1.Pre sale service A. make technical solution B. send quotation, technical data sheet and drawing prepare power transmission plan, testing plan and shipment plan
2. In sale service supervise the manufacturing schedule totally in accordance with the plan b. send photos to customer during every manufacturing process(hold point) c. inform the customer one week before testing. d. quick response within 12 hours any time.
3. After sale service a.All parts are under Two Years Warranty with defects from manufacturer. All spare parts and component can be offered for free from the original manufacturer or HFY. b. Training We will provide free training to your technician free of charge at our factory site in Qingdao, China. The total training period would be 2 working days. All travel and related expensed would be at the purchaser's expense. c. Technical Documents: Original operation and service manuals, the service manual is completed with wiring diagram, block diagram and trouble shooting information. d. Installation Usually, clients can do the installation and operation by themselves when following the detailed English user manual. If clients want our technician do this work, please read the following terms: The initial installation is not included with the professional HFY team member. All installation with the Hengfengyou team must be scheduled at least 4 weeks in advance before actual trip taken. All necessary connectivity must be ready prior the service being scheduled. While Hengfengyou team member arrives at the site for a complete and final installation, two days training course will be provide to the customer for operation and maintenance procedure. The initial installation is provided within 5 working days excluding travel days. The actual installation days may vary, based on different machine mode. Each day of working hour consist at 8 working hours. Any additional day will be charge according to our service fee listed below. When initial installation is being called for the Hengfengyou team required, the surcharge will be made in advance by the purchase at US$100/person/day plus all travel expenses. Travel expenses; local and destination transportation charges (air, train, ferry, bus, taxi or any means of transportation required to arrive to/from destination); accommodation (minimum of 3 star hotel facility) and 3 daily meals.
The Finished Project
Q1: Is OEM/ODM available?
A1: Yes, it is! Our products can be Customized. We have design and engineer teams,we can customize products according to customers' drawing or requirements.
Q2: What's your MOQ?
A2: One Set.
Q3: How is the delivery time?
A3: It depends your order quantity and it normally takes about 15-20 days.
Q4: How do you control the quality?
A4: We have QC team comply with TQM to ensure the quality. Each step is in compliance to the standards. At the same time, we will take photos and shoot video for you if you need.Every product will be fully assembled and carefully tested before packing and shipping.
Q5: How long is the warranty?
A5: Within one year from the sale date, if there are any accessory problems, you just provide the photos of damaged accessory, then we will provide free accessory. According to the number of products, we will provide easily damaged accessories for free. We also can provide technical support if you need.