630kVA Electrical Prefabricated Power Distribution Equipment Transformers Substation
The European type substation, is a complete set of new power transformer equipment developed by our company on the basis of transformation of national urban network making the optimal combination for the oil-immersed sealed power transformer and high and low voltage electrical components. Through structure optimization, the switchgear shall be miniaturized to extreme extent which greatly reduce the occupied area of the combined transformer with such advantages as small volume, low noise, reliable power supply, reasonable structure, blexible for installation, easy for operation and capable of going deep into the load center to maximum extent, etc.It can assemble network automation terminal (FTU) in the high-voltage ring network cabinet, realize the reliable detection of short circuit and single-phase grounding fault, and has the function of "four remote", which facilitates the automatic upgrade of network distribution. It is widely used in residential quarters commercial centers stations industrial and mining enterprises airports railroads schools hospitals, high-rise buildings and places.
The Specification
| Item | Units | High-voltage electrical apparatus | Transformer | Low-voltage |
| Rated voltage | KV | 4/10 | 6/0.4 10/0.4 | 0.4 |
| Rated capacity | KVA | 50~1600 | ||
| Rated current | A | 200/400/630 | 100~3200 | |
| Rated short circuit breaking current | A | load switch 400-630 | 15~63kA | |
| KA | The combination switch depends on the fuse | |||
| Rated short time withstand current | KA | 16,20(4s) | 15(1s) | |
| 30(1s) | ||||
| Rated peak withstand current | KA | 31.5,50 | 30 | |
| 63 | ||||
| power frequency withstand voltage(1min) | KV | Opposite and interphase 32/42 | 25/35(oil type) | ≤0.3,2 |
| isolating distance 36/48 | 20/28(dye type) | >0.3,2.5 | ||
| Lightning impact voltage (peak) | KV | Opposite and interphase | 60/75 | |
| 60/75 | ||||
| isolating distance | ||||
| 70/85 | ||||
| Noise level | 55db | |||
| Protection grade | IP23 | |||
| Executive standard | GB/T17467 | |||
| DL/T537 | ||||
Note:1.All products will be tested before delivery.
2.All products can be customized.
HFY Certificate and Services
1.Pre sale service
a. make technical solution
b. send quotation, technical data sheet and drawing
c. prepare power transmission plan, testing plan and shipment plan
2. In sale service
a. supervise the manufacturing schedule totally in accordance with the plan
b. send photos to customer during every manufacturing process(hold point)
c. inform the customer one week before testing.
3. After sale service
a. installation and commissioning, training the workers
b. quick response within 12 hours any time
c. provide 12 months guarantee period normally.
Conditions of Use
1.The maximum ambient air temperature shall not exceed 40°C, and the minimum shall not below -25°C;
2.The altitude shall not exceed 1000m. If special customized transformers and low-voltage components are used, the altitude can reach 4,000m;
3.The vertical inclination is no more than 5°, and no violent vibration and impact;
4.The air humidity is not more than 90% (25°C);
5.No gas and conductive dust that will seriously affect the insulation of transformer,no explosion hazard and corrosion of electrical components;
6.Outdoor wind speed shall not exceed 35m/s;
7.If service conditions beyond the above, specially customized product is available.
Packaging & Shipping
For the shipping , we accept EXW, FOB and CIF terms, you can use your own shipper or ours.
Fasten: To use steel wires to fasten the large products in container to make sure it is stable enough.
The Finished Power Project
Our Team
we are the large-scale electric complete sets of manufacturers in China, specializing in oil-immersed transform ers, dry-type transformers, high-voltage Cabinets, low-voltage cabinets and substa tion manufacturing specialized electrical enterprises. We can provide good quality and pretty competitive price.
FAQ
Q1: Is OEM/ODM available?
A1: Yes, it is! Our products can be Customized. We have design and engineer teams,we can customize products according to customers' drawing or requirements.
Q2: What's your MOQ?
A2: One Set.
Q3: How is the delivery time?
A3: It depends your order quantity and it normally takes about 15-20 days.
Q4: How do you control the quality?
A4: We have QC team comply with TQM to ensure the quality. Each step is in compliance to the standards. At the same time, we will take photos and shoot video for you if you need.Every product will be fully assembled and carefully tested before packing and shipping.
Q5: How long is the warranty?
A5: Within one year from the sale date, if there are any accessory problems, you just provide the photos of damaged accessory, then we will provide free accessory. According to the number of products, we will provide easily damaged accessories for free. We also can provide technical support if you need.
