Adria Manufacture - Mining Technology

2022-05-21 14:53:27 By : Ms. Tracy Zhang

Adria is an ISO 9001: 2008 registered company specialising in underground mining electrical equipment. Our most popular medium-voltage products include portable substations, mine power centers, monobloc skid-mountedsubstations, portable switchgears, portable medium-voltage switches, junction boxes, etc. We can also produce high-quality custom products to fit customer needs or special application.

We offer a wide range of low-voltage equipment such as single or multiple output power take-off panels (PTO), motor starter and controls, automation control panel (PLC), and control and protection panels for power station. Portable substations for underground mines

With sales all over the world, our portable substations are well renowned in the industry. Although the 1,000kVA transformer size is the most common, we can accommodate basically any kVA, voltage and frequency level in our skid-mounted substations. It typically contains a high-voltage load break switch, a mine duty power transformer and a secondary low-voltage distribution. Adria’s portable substation can accommodate any kVA size and voltage level. All of our substations are able to be tilted vertically for slinging in a mine shaft. A custom portable substation that was produced for a client in Africa. It features a 1,000kVA transformer, 400V auxiliary distribution and three 400V 140kW softstarters with ground fault protection. A custom mine power center that was produced for a client in Canada. This design features multiple segregated 600V motor starters and 600V branch feeder breakers with ground fault protection. Adria’s portable switchgear with load break switches can accommodate a wide variety of configuration. Stacked portable switchgear allows for two feeder load break switches on top of each other in order to save floor space. Bus bar connections arrangement.

The mine power center can be equipped with many options, such as ground fault protection, ground pilot wire monitoring, neutral grounding resistor and monitoring, infrared inspection viewports (for thermography inspection), arc flash detection system, and so on. In addition to a standard ‘step-down’ configuration, our portable substation can be also configured as a ‘step-up’ unit, or voltage booster substation. Portable switchgear for mining applications

Our portable switchgear is specially designed for mining uses. We offer two different prodct lines: skid-mounted switches and stacked switch line up.

Skid-mounted switches version are compact, rugged and mounted on a continuous skid. Switch unit are installed side by side (or back to back) and can accommodate a wide variety of configuration. As per our substation, our portable switchgear can be supplied at any voltage level and capacity. The low profile design allows the portable switchgear to be moved easily in tight spaces and galleries.

The stacked switch design allows you to have rugged equipment that can be installed permanently in an underground electrical room. It features a fully welded construction and a rigid base with fork-lift access. This is the ideal product to set up switchgear where height is less a concern. Medium and high-voltage junction boxes

We design and supply various type of medium and high-voltage junction boxes. Whether it is with bussbar and post insulator, or with submersible deadfront connector system, our junction boxes will fulfill your needs.

The standard medium-voltage junction box is generally wall mounted or rack mounted. They can be customised to fit your requirements. For the high-voltage junction boxes, they can be wall mounted, base mounted and skid mounted. If your application is more specific, we can design a unit that will meet your requirements. Power take-off panels (PTO)

Our Jx series power take-off panel offers a variety of advantages. It includes multiple output, auxiliary distribution, ground fault protection and rugged construction. In order to ease manipulation, lifting eyes and fork-lift slots in the base is standard on our Jx series PTO panel.

We also offer single-output power take-off panel. Technically similar to the Jx series, they offer only one ground fault monitored output and can be wall mounted.

All of our power take-off ground fault panels can accommodate different brand of receptacle to fit your standard mine site installation. About Adria

With our product line up, you have a one stop source for all your underground electrical equipment needs. Do not hesitate to use the form below to send us your business inquiry.

Substations are designed to supply power to electrical equipment used in underground development.

Designed to facilitate the connection of medium voltage cables, the junction box is built with a set of plates for connectors, which allows the number of cable inputs to be changed.

Portable switches are available with multiple mounting options and can be delivered in a modular way, if necessary, and easily re-assembled on site.

These feeding panels include protection such as circuit breakers, in order to have control near the work area.

We have developed an intelligent battery charger for electric vehicles in the mining industry.

This document contains detailed information on components and equipment for applications in the mining and heavy industries.

Adria Manufacture design, develop and produce medium and low-voltage electrical equipment for a number of underground applications.

Adria supplies underground electrical equipment for the mining and industrial markets.

As a manufacturer of electrical and power equipment, Adria is committed to providing its customers with superior products and outstanding service to meet their current and future needs.

Adria is to exhibit at the upcoming PDAC 2020 in Toronto, Canada.

Adria Inc. (Adria Power Systems®) Ranked as one of Canada’s Fastest-Growing Companies on the 2019 Growth 500 list,

Adria Manufacture, a company specialized in the manufacture of power electrical equipment, is proud to announce the signature of a major long-term contract to provide all electrical substations for the Voisey's Bay expansion project of mining giant Vale.

Adria Manufacture is to exhibit their solutions at the forthcoming CIM Expo in Montreal, Quebec, Canada.

Adria Manufacture is to exhibit their products at the forthcoming CIM Expo in Vancouver, Canada.

Adria Manufacture is to host a stall at CIM Expo this month.

When our customer told us their needs, we had to develop a specific product. So, we have already worked closely with their technical team.

Manufacture Adria inc. shares its expertise in manufacturing, mining, electrical equipment with a pumping solution provider internationally renowned.

Adria, a specialist in underground mining electrical equipment, is to attend World Mining Congress 2013.

Adria Manufacture has released a free white paper on Mining Technology, detailing their line of underground mining electrical equipment, including portable substations, mine power centers,

Adria Manufacture, a manufacturer of medium and low-voltage equipment such as portable substations, monobloc skid mounted substations, and control and protection panels for underground mining and power station applications, will be exhibiting at MINExpo International, taking place in Las Vegas, Nevada, US, on the 24-26 September 2012.

Adria Manufacture designs, develops and constructs industrial electrical equipment; in particular products such as portable substations, mine power centres, monobloc skid-mounted substations, portable switchgears, portable medium-voltage switches and junction boxes.

Thank you for submitting the form. Your enquiry will be submitted to the company.